MOALANI 3D PARTS
MOALANI 3D PARTS
Embedded Files
SEAT POST SHIMS
SEAT POST SHIMS
Rider Weight & Seat Post Diameter
We recommend an outer seat post diameter of 31.8 mm for riders up to 70 kg, 33.9 mm for riders from 71-85 kg and 34.9 mm for riders over 85 kg.
Our shims have only been tested with our recommended Silverock seat posts. We cannot guarantee fit with other brands' seat posts (sandpaper might come in handy though).
3D PARTS FAQ & HOW-TO
3D PARTS FAQ & HOW-TO
Design Freedom
For complete design freedom, we use a few 3D-printed parts on our bikes.
It's Easy
3D printing is easy: you upload, define, pay and later get your parts by mail.
Fully Tested
All parts have been fully tested prior to their public release on this page.
Same Material
All parts are made from PA-12 (Nylon), a durable yet flexible engineering plastic.
Multi-Jet Fusion
We use MJF for all our parts given its quality and low volume cost.
More Ideas
This list will grow as we receive requests from our buyers for more custom parts.
Steps
Steps
Select
Choose the right part for your needs.
Download
Fetch the part's STEP file below.
Upload
Ingest the STEP file to a 3D service.
Define
Set all recommended print parameters.
Order
Pay online for your 3D parts.
Receive
Get them by mail a few days later.
Recommended Parameters
Recommended Parameters
We couldn't make this any easier for you: we designed all our parts so that they can be 3D-printed with the exact same parameters.
Method
MJF
Do not use SLS, FDM or SLA print methods!Material
PA12 or PA12S
Do not use PA12-CF/-KF/-GF! (all too brittle/abrasive)Material Color
Any
Any PA12 color you like.(usually comes in gray)
Finishing
Vapor Smoothing
Recommended for PA12, but not needed for PA12S.Dyeing
Optional
This allows you to pick any specific color you want.Tolerance
Standard
MJF prints within ±0.3% of nominal STEP file dimensions.Recommended 3D Printing Services
Recommended 3D Printing Services
Report abuse